EPACS Publications

E-RT1.2

  1. Satpathi, K. & Ukil, A. (2015, June). Protection Strategies for LVDC distribution system. Paper presented at the 11th IEEE PowerTech Conference, Eindhoven, Netherlands. DOI:10.1109/PTC.2015.7232476 |NTU Access

E-RT4.1

  1. Ma X.H., Su R., Tseng K. J., Wang S., and etc. Review of High Speed Electrical Machines in Gas Turbine Electrical Power Generation. Paper to be presented at the IEEE TENCON 2015, Macau, CN.
  2. Anand Prabhu & J. Y. Loh et al., (2015). Soft Magnetic Material for Embedded Machines in More Electric Engines. Paper to be presented at the 22nd Soft Magnetic Materials Conference (SMM 22), São Paulo, Brazil.

E-RT5.1

  1. Yitao Liu, K.Y. See, R. Simanjorang, Liu Yong, C. J. Gajanayake, C. F. Tong, Arie Nawawi, Shan Yin, A.Sakanova, Men Kai, K. J. Tseng, A.K. Gupta. (2015) Paper presented at the 2015 Asia-Pacific International EMC Symposium and Exhibition, Taipei, Taiwan.
  2. Nawawi, A., Tong, C.F., Liu, Y., Sakanova, A., Yin, S., Liu, Y., Men, K., See, K.Y., Tseng, K.J., Simanjorang, R., Gajanayake, C.J., Gupta, A.K. (2015, March). Design of high power density converter for aircraft applications. Paper presented at the International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS), Aachen, Germany.DOI:10.1109/ESARS.2015.7101418 | NTU Access
  3. Shan Yin, K. J. Tseng, C. F. Tong, R. Simanjorang, and et al., “Switching characterization of SiC half bridge module for high power density converter”, Paper to be presented at the 37th IEEE International Telecommunication Energy Conference (INTELEC), 2015, Osaka.
  4. Shan Yin, K. J. Tseng, C. F. Tong, R. Simanjorang, and et al., “Gate driver optimization to mitigate shoot-through in high-speed switching SiC half bridge module”, Paper presented at the 11th IEEE International Conference on Power Electronics and Drive Systems (PEDS), Sydney, 2015, pp. 484-491.DOI:10.1109/PEDS.2015.7203388| NTU Access
  5. Sakanova, Shan Yin, Yong Liu, Kai Men, Jiyun Zhao, K.Y. See, K.J. Tseng, A. Nawawi, C. F. Tong, Yitao Liu (2015, March) Heat sink design for high power density converter in aircraft applications: Parameter sensitivity analysis. Paper presented at the ESARS conference, Aachen, Germany DOI:10.1109/ESARS.2015.7101419| NTU Access
  6. F. Tong et al (2015, Sep). Challenges in Switching Waveforms Measurement for A High-Speed Switching Module. Paper to be presented at IEEE ECCE, Montreal QC.
  7. Sakanova, J. Zhao, and K-J Tseng (2015). Investigation on the influence of nanofluids in wavy microchannel heat sink. IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.5, no. 7, 2015, 956-970.DOI:10.1109/TCPMT.2015.2441114| NTU Access

E-RT5.2

  1. Mohd Tariq, Ali I. Maswood, Chandana J. Gajanayake , Gabriel H. P. Ooi, Pradip Chatterjee, Sandeep Madishetti, Devinda A. Molligoda, Amit Kumar Gupta , “Battery Integration with More Electric Aircraft DC Distribution Network Using Phase Shifted High Power Bidirectional DC-DC Converter”, IEEE PES Asia-Pacific Power and Energy Engineering Conference 2015- Brisbane, Australia.

E-RT6.1

  1. Barzegar, A., Su, R. , Wen, C., Rajabpour, L., Zhang, Y., Gupta, A., Gajanayake, C., & Lee, M. Y. (2015, Jun). Intelligent Power Allocation and Load Management of More Electric Aircraft. Paper presented at the IEEE 11th International Conference on Power Electronics and Drive Systems, Sydney, NSW, Australia. DOI:10.1109/PEDS.2015.7203445 | NTU Access
  2. Chen, C. Wen, M.Y. Lee, C.J. Gajanayake, & A.K. Gupta. (2015, June). Design of a highly reliable three-phase four-leg inversion power supply for more electric aircraft. Paper presented at the IEEE Conference on Industrial Electronics and Applications, Auckland, New Zealand.
  3. Zhang, R. Su, C. Wen, A. Barzegar, M. Y. Lee and C. Gajanayake. Distributed Power Allocation and Scheduling Strategy of Electrical Power System in More Electric Aircraft. Abstract Accepted at the 19th Power Systems Computation Conference (PSCC2016), Genoa, Italy.
  4. Qianwen Xu, Peng Wang, Jianfang Xiao, Changyun Wen, Lee Meng Yeong. ‘Modeling and Stability Analysis of Hybrid Energy Storage System under Hierarchical Control,’ IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), 2015.

E-RT7.1

  1. Shicong Yang; G.Viknash Shagar; Abhsiek Ukil; S.D.Gamini Jayasinghe and Amit Kumar Gupta, (2015, July) Evaluation of Low Voltage Ride-Through Capability of Sychronous Generator Connected to a Grid, Paper presented at IEEE PES General Meeting 2015, Denver,CO.

E-RT9.1

  1. Yu, M., Wang, D.W., Ukil, A., Viswanathan, V., Sivakumar, N., Gajanayake, C.J., Gupta, A.K., & Nguyen, V.H., (2014, Dec),   Model-based failure prediction for electric machines using particle filter. Paper presented at International Conference on Control, Automation, Robotics and Vision (ICARCV), Singapore.DOI:10.1109/ICARCV.2014.7064591| NTU Access
  2. Nguyen, V.H., Wang, D.W., Yu, M., Viswanathan, V., & Sivakumar, N. (2015, June). A Survey of fault Indicator for stator winding inter-turn fault detection in low voltage induction machines. Paper presented at IEEE Conference on Industrial Electronics and Applications (ICIEA), New Zealand.
  3. VietHung Nguyen, Danwei Wang, Abhisek Ukil, Sivakumar Nadarajan, Viswanathan Vaiyapuri, and Chandana Jayampathi, “A Closed-Form Solution to Fault Parameter Estimation and Faulty Phase Identification of Stator Winding Inter-Turn Fault in Induction Machines“, 41st Annual Conference of the IEEE Industrial Electronics Society (IECON)-Nov 2015, Japan (accepted for presentation).

E-RT9.2

  1. Mohamed Halick Mohamed Sathik, King-Jet Tseng, Chandan Jayampathi Gajanayake, Rejeki Simanjorang, Amit Kumar Gupta, Comparison of power cycling and thermal cycling effects on the thermal impedance degradation in IGBT modules, 41st Annual Conference on IEEE Industrial Electronics Society -2015, Japan.

Comments are closed