DR2007

5 ~ Felting

| Natasya Adistana

Technique

Felting. It is to form the shape of felt from wool.

Material(s)

  • Felting wool
  • Wool yarn
  • Hot water
  • Soap

Tool(s)

  • Felting needle
  • Base

Process

Wet Felting

  1. Arrange the felting wool in a thin layer
  2. Pour hot water and a little soap onto the wool to soften the fibres
  3. Rub the wool to close the gaps and shape them as wanted
  4. Leave the piece to dry

Needle Felting

  1. Bundle up felting wool or wool yarn into a ball
  2. Poke with the felting needle on the base
  3. Poke more until the wanted shape is created

Nuno Felting

  1. Arrange felting wool or wool yarn onto the fabric
  2. Poke them with the felting needle
  3. Poke more until the wanted shape is created

—Photos

Pretty samples of felting
Needle felting
Wanted it to be bigger, layered it with more felting wool
Wet felting process
My sample

Reflections

It is indeed a process that takes a long time but I enjoyed it. I didn’t know there is such technique before. The downside is that I keep on accidentally poking my finger and I notice that the felting needle is not only a long needle but has some texture on it (it hurts more than getting poked by sewing needle). However, itt is simple and can be done for a lot of things, I will use it in the future!

4 ~ Thermoplastics

| Natasya Adistana

Technique

Thermoplastics. It is to reshape thermoplastic materials by boiling it.

Material(s)

  • 100% polyester organza
  • Mould (water and heat resistant)
  • Elastic bands
  • Aluminum foil

Tool(s)

  • Pot
  • Stove

Process

  1. Wrap the mould around the organza and tie tightly with an elastic band
  2. Wrap the whole organza with aluminium foil
  3. Submerge the aluminum ball into pot of boiling water for 45 – 75 mins

—Photos

Some details
Attempted to make a rose-like shape
Before wrapping with aluminium foil
Before wrapping with aluminium foil
Boiling process
After boiling
My sample
My sample
My sample

Reflections

It was really pretty and I like the texture and feel of organza. It created interesting shape. However, I should say this method is not as simple as it looks and might result better (similar to imagined) for those with more experience.

5 ~ Applique

| Natasya Adistana

Technique

Applique. It is combining different material by sewing it together.

Material(s)

  • Fabric of different colours and shapes

Tool(s)

  • Sewing pins
  • Sewing machine

Process

  1. Cut out the pieces of fabric into the wanted design
  2. Arrange them onto the base fabric
  3. Pin to keep  in place
  4. Sew with the sewing machine in the wanted thread and stitch

—Photos

Class demonstration
Some pretty samples in class

Reflections

It is a useful technique that can be easily applied for many things. The method is quite simple, especially when one has the planned design. The challenge comes when using the machine as some times the thread might not be suitable with the stitching type or it just not able to hold the fabric as wanted.

4 ~ Vacuum Forming

| Natasya Adistana

Technique

Vacuum Forming. It is to create plastic mould using vacuum forming machine.

Material(s)

  • Mould
  • Plastic sheet

Tool(s)

  • Vacuum forming machine

Process

  1. Turn on and heat up the machine (make sure the heat knob is at 3)
  2. Cut out a sheet of the plastic sheet to required size
  3. Place the mould onto the allocated spot of the vacuum forming machine
  4. Place the plastic sheet on the opening
  5. Pull down the cover
  6. Lock it in place
  7. Pull out the heater and wait for the plastic sheet to heat up and straightened
  8. Turn the vacuum on
  9. Pull the lever at the right side to bring the mould up
  10. Once the mould touches the plastic sheet, pull down the little lever on the left to stretch the plastic for more complex or taller mould

—Photos

My sample
Vacuum forming machine

Reflections

I did not realise the school has the machine, and such machine exist with not so much complexity to use. Great knowledge, likely to use it in the future.

3 ~ Fabric of Thread

| Natasya Adistana

Technique

Fabric of Thread. It is sewing threads on water soluble material to get fabric-like result.

Material(s)

  • Variety of thread, yarn, fabric strips
  • Water soluble stabiliser
  • Mould (optional)

Tool(s)

  • Sewing pins
  • Sewing machine

Process

  1. Arrange the thread and yarn on the water soluble stabiliser
  2. Place another sheet of water soluble stabiliser on top
  3. Pin the layers to keep them in place
  4. Sew in grids and decorate it as wanted
  5. Submerge the stabiliser into water and wash off the starch. Wash completely to make it flexible
  6. (optional) Water the stabiliser and leave some starch on the thread/yarn piece. Place it over a mould and leave to dry overnight.

—Photos

Class demonstration

My process

My sample

Reflections

It was a fun process where one can really explore, do and mix different design. It has been a really long time I since I used a sewing machine. The only cons of the process and what hinders from doing it on my own would be the expensive water soluble stabiliser.

3 ~ Plastic Fusing

| Natasya Adistana

Technique

Plastic Fusing. It is combining plastic by heating it up.

Material(s)

  • Different plastics
  • Baking paper

Tool(s)

  • Iron

Process

  1. Place sheets of different plastic bags into the desired design
  2. Sandwich the plastics in between two sheets of baking paper
  3. Iron for a few seconds

—Photos

My sample
My sample
Random experimentation (but turns out not so nice)

Reflections

It was a method that can be used to create colorful things cheaply. I lost my plastic fusing and needed to recreate it. However, as I did not have any baking paper, and tried to do iron it directly and it didn’t turn out as it should be. Now that I thin of it, I should have tried to use other type of paper that might work. It has became rather experimental to me.

2 ~ Transfer Printing

| Natasya Adistana

Technique

Transfer Printing. It is transferring images/print by using heat.

Material(s)

  • Polyester satin
  • Plywood
  • Transfer paper (The Magic Touch: TTC 3.1 and CPM 6.2)
  • Fabric crayon
  • Transfer ink
  • Flat objects (e.g. thread, feather, leaf)
  • Baking paper

Tools(s)

  • Iron
  • Heat press machine

Process

Direct transfer printing

  1. Draw with fabric crayon or paint using transfer ink on a sheet of paper
  2. Place the paper facing down onto polyester satin
  3. Sandwich the paper and fabric in between two sheets of baking paper
  4. Place a hot iron on top of the layers or use heat press machine to transfer the design

Indirect transfer printing

  1. Make a block on a sheet of paper by drawing with fabric crayon or painting using transfer ink
  2. Place flat objects onto the paper before placing them both onto polyester satin
  3. Sandwich the paper, object and fabric in between two sheets of baking paper
  4. Place a hot iron on top of the layers or use heat press machine to transfer the design

Digital transfer printing

  1. Print the desired design onto the transfer paper (TTC 3.1 or CPM 6.2, depending on the type of surface to transfer onto)
  2. Place the transfer paper facing down onto polyester satin or plywood
  3. (satin) Sandwich the paper and fabric in between two sheets of baking paper
    (plywood) Sandwich the paper and wood in between baking paper on the bottom and a foam on the top – the foam helps to push down the transfer paper to ensure more equal transfer
  4. Place the layers into the heat press machine, set it and press

—Photos

Tools
Class demonstration with iron

Class demonstration with heat press machine

Class samples
Creating pattern
My samples
Notes on heat press machine
My samples
My sample
My sample

Personal reflections

I feel it is  a very first technique that is simple yet fascinating. I have always know the gist of direct/ indirect transfer printing but never really tried it before. An honestly, I didn’t know about digital transfer printing before. I still have the paper and will try it later 🙂

1 ~ Introduction

| Natasya Adistana

The beginning of DR2007 Surface Design taught by Asst Prof Galina Mihaleva. The lesson was introduction to the course and what we expect from it. We got mystery bag of different items and were ask to observe and present about it. Never did I know that I was about to learn about so many things in the upcoming week

The mystery bag