Generator Mostly Done Works as intended Pump System Done Works as intended What’s Left: TDS Arduino Wheels Joining the Two
Published 18 Jul 2022, Mon by TAN ZE MING
Arduino Progress! TDS Sensor functional PreFilter to remove sand and large residue ORIENTATION 1: Mounting on the Al Frame Not very successful :((((( Current required wayyy to high Pump…
Read More Putting the Pump onto the Aluminium Frame [11/07/22-18/07/22]
Published 7 Jul 2022, Thu by TAN ZE MING
We had a meeting with Dr Mukta To find out: 1. Features and significance of Diaphragm Pump (and compare it with other kinds of pump). 2. Whether pre-filtration step using…
Published 2 Jul 2022, Sat by TAN ZE MING
Battery Management System We successfully soldered the Battery Management System (BMS) to the Battery Holder. 1. Tested BMS & battery holder Voltage is all appropriate and expected. 4 Rechargeable…
Published 2 Jul 2022, Sat by TAN ZE MING
6:1 pulley system – capable of producing up to 40 V without load as tested with voltmeter. Steady rotation can produces voltage of around 20V. Generator is tested with a…
Published 2 Jul 2022, Sat by TAN ZE MING
Rechargeable Batteries have arrived. Charging battery. Mains power used to simulate AC Generator. Found that belt friction may be insufficient for higher gear ratios 2:1 + 4:1 = 8:1 pulley…
Published 2 Jul 2022, Sat by TAN ZE MING
We met Dr Mukta who will be our supervisor and adviser for this project, especially for the filtration system. We managed to eliminate any leakages with sealing tape. We managed…