We had a meeting with Dr Mukta To find out: 1. Features and significance of Diaphragm Pump (and compare it with other kinds of pump). 2. Whether pre-filtration step using…
Published 4 Jul 2022, Mon by Clarissa Joanna Lim
More work has been done to think about the assembly of the whole system. Electrical Power System Encased within a box created by aluminium profiles (44cm x 22cm x 51cm)…
Published 2 Jul 2022, Sat by TAN ZE MING
Battery Management System We successfully soldered the Battery Management System (BMS) to the Battery Holder. 1. Tested BMS & battery holder Voltage is all appropriate and expected. 4 Rechargeable…
Published 2 Jul 2022, Sat by TAN ZE MING
6:1 pulley system – capable of producing up to 40 V without load as tested with voltmeter. Steady rotation can produces voltage of around 20V. Generator is tested with a…
Published 2 Jul 2022, Sat by TAN ZE MING
Rechargeable Batteries have arrived. Charging battery. Mains power used to simulate AC Generator. Found that belt friction may be insufficient for higher gear ratios 2:1 + 4:1 = 8:1 pulley…
Published 2 Jul 2022, Sat by TAN ZE MING
We met Dr Mukta who will be our supervisor and adviser for this project, especially for the filtration system. We managed to eliminate any leakages with sealing tape. We managed…
Published 29 Jun 2022, Wed by Clarissa Joanna Lim
We managed to assemble the parts we bought! With a makeshift water tank (our plastic container), we connected it to the water pump via a hose tubing that was…
Published 29 Jun 2022, Wed by Clarissa Joanna Lim
This was the first day all five of us got together to do MnT. As Fu Den has been working on the generator for quite some time, the rest of…