Process

Software

~ Simplify3D Settings ~

~Arduino Code ~

Firmware

~ Marlin Changes Upload onto GitHub ~

Hardware

General Printer:

Materials Needed:

  1. Creality 3D Ender 3 Printer

Instructions:

  1. Build Creality 3D Ender 3 Printer according to the manual in the package.

LA Mount:

Materials Needed:

  1. Reciprocating Cycle Linear Actuator with DC Gear Motor 12 V/24 V DC Stroke 50 mm for Piston Movement, RPM = 120 RPM x 1
  2. HSS86 Hybrid Servo Driver + NEMA34 Closed Loop High Speed Stepper Servo Motor x 1 
  3. 20mm by 20mm aluminium profiles x 4: 495 mm x 2, 225 mm x 1 & 195 mm x 1
  4. 3D Printed (Bracket file names) x …, (LA mount file name) x 1 and (LA Module Head file name) x 1
  5. Brackets: M5 Screws and T-slot Nuts x 31 sets & Short PTFE Tube x 1
  6. Heat Sink x 1
  7. Large PTFE Tube Quick Fitting x 1
  8. LA Mount: M5 Screws and T-slot Nuts x 6 sets & M4 Screws T-slot Nuts x 8 sets 
  9. LA Module Head: M3 Screws x 4 & M6 Screw x 1 

Instructions:

Yarn Spool:

Materials Needed:

  1. Daiso 100% Wool Yarn Regular Thick E07B Winter Yarn x 1
  2. Empty Dremel 26153D0100 PLA White Filament, 1.75mm, 0.5 kg Spool x 1
  3. Creality 3D® Two Phase 42-34 RepRap 42mm Extruder Stepper Motor x 1
  4. Heat Sink x 1
  5. 3D Printed (Yarn Spool Motor House File name) x 1
  6. Yarn Spool Motor House: M3 Screws and T-slot Nuts x 4 sets & M5 Screws T-slot Nuts x 4 sets 

Instructions:

Tubing:

Materials Needed:

  1. Internal PTFE Tube (4mm diameter): 840 mm x 1
  2. External Tube (6mm diameter): 700 mm x 1

Instructions:

Main Body:

Materials Needed:

  1. Small PTFE Tube Quick Fitting x 1
  2. Large PTFE Tube Quick Fitting x 1
  3. Internal PTFE Tubing x 1 (from tubing)
  4. External PTFE Tubing x 1 (from tubing)
  5. Daiso Felting Needle x 1
  6. Yarn Threader x 1
  7. Daiso 100% Wool Yarn Regular Thick E07B Winter Yarn x 1
  8. 3D Printed (Needle Holder File) x 1, (Yarn Feeder File) x 1, (Main Body Part I File) x 1 and (Main Body Part 2 File) x 1
  9. Needle Holder: M2 Screws x 4 & M3 Screw x 4 
  10. Main Body: M3 Screws x 4 & M6 Screw x 4 

Instructions:

Embroidery Base:

Materials Needed:

  1. 3D Printed (Embroidery Base File) x 1
  2. ArtFriend 150 mm x 200 mm x 20 mm Styrofoam Foam Slab x 1
  3. 1500 mm x 200 mm Soft Felt Cloth x 1
  4. 40mm Width Binder Clips x 4
  5. 6mm Map Pins x 1 Container

Instructions:

Controllers:

Materials Needed:

  1. Arduino Mega 2560 with Ramps1.4 x 2 
  2. Power Banks x 2
  3. HSS86 Hybrid Servo Driver + NEMA34 Closed Loop High Speed Stepper Servo Motor x 1 (from LA Mount)
  4. Creality 3D® Two Phase 42-34 RepRap 42mm Extruder Stepper Motor x 1 (from Yarn Spool)
  5. Arduino Cables x 2
  6. 230 mm by 230 mm Square Base x 1 

Instructions:

(Insert wiring manual, which port to connect to for both yarn spool motor and jabbing stepper motor)

(Insert Picture of How to Mount everything to the square base)