With our new PSU finally here, we drilled a hole in our set-up and soldered the 3-pin plug connection to install our PSU. With the PSU installed, we are now able to have only 1 PSU powering our entire set-up, instead of the original 6 that we borrowed from the MnT lab. This made our set-up a lot more portable, especially since the PSU could be stored inside the set-up. We also installed our new screen, but were unable to test the running of our set-up using the screen to control our functions as our Rpi was down. After a week of troubleshooting, we were thankful to know that our components were in working order and we did not need to purchase (and wait for) a new Rpi!

With only 2 weeks to our final presentation, we also started working on our presentation slides. It is indeed rewarding to see our project starting to come together.