MRT Publications


  1. Ranjit Kumar Barai, Tegoeh Tjahjowidodo, and Bobby K Pappachan (2015). Fuzzy Inference System Based Intelligent Sensor Fusion for Estimation of Surface Roughness in Machining Process. 9th International Conference on Sensing Technology (ICST 2015), December 8-10, Auckland, New Zealand


  1. Han Bo, Muhammad Azhar, Dhanya Menoth Mohan, Domenico Campolo. (2015). Review of robotic control strategies for industrial finishing operations. IEEE ISMA’15


  1. Balasubramanian Nagarajan, Sylvie Castagne,Swaminathan Annamalai, David Fan Zheng, Chow Cher Wong, “Influence of heat treatment on the conductivity of nickel-based superalloys”, International Conference on Mechatronics, Automation and Manufacturing – 2015, Singapore


  1. V Vijayaraghavan and S Castagne, “Computational Model for Predicting the Effect of Process Parameters on Surface Characteristics of Mass Finished Components”, Engineering Computations


  1. Kai Liang Tan and Swee Hock Yeo. Cavitation Erosion Study in Deionized Water Containing Abrasive Particles. 26th DAAAM International Symposium, Oct 21-24, Zadar, Croatia


  1. Nay Win Khun, Adrian Wei-Yee Tan, Rupert Adams, Eyre Harry, Anna Tai, Nicholas Weeks, Erjia Liu (invited), “Microstructure and wear behaviour of cold sprayed Ti6Al4V coatings”, ThinFilms Workshop2015 cum the Thin Films and Nanotechnology Conference, Changhua, Taiwan, 16-17 Jul 2015.
  2. Adrian Wei-Yee Tan, Nay Win Khun, Rupert Adams, Nicholas Weeks, Erjia Liu, “Microstructure and mechanical properties of Ti6Al4V coatings deposited using high-pressure cold spraying process”, International Conference on Advances in Functional Materials (AFM2015), New York, USA, 29 Jun-3 Jul 2015.


  1. S.Kumar, M.J.Tan, B.S. Wong, N.Weeks (2015).Post Weld Heat Treatment surface residual stress measurements using X-ray diffraction. ETNDT6, Belgium


  1. Guru, Prasad AS., Murukeshan V. Matham, and Kelvin HK Chan. “A flexible image fiber probe based speckle imaging for extraction of surface features with possible application in intra-cavity inspection.” International Conference on Optical and Photonic Engineering (icOPEN2015). International Society for Optics and Photonics, 2015. DOI:10.1117/12.2190498


  1. Song, C., M.V. Matham, and K.H.K. Chan. Speckle referencing: digital speckle pattern interferometry (SR- DSPI) for imaging of non-diffusive surfaces. Proc. SPIE 9524, 95242P, 2015. DOI:10.1117/12.2190504

Comments are closed