20/06/2019Ā
Agenda:Ā Ā
- Configuring theĀ pin-hole camera (OEM camera 5640)Ā
- Build ChassisĀ Ā
- 3D design rotatable turntable for transceiverĀ
Ā
TasksĀ Accomplished:Ā Ā
- Configured the camera chips and tested the pin-hole camera borrowed from Tony in the labĀ Ā
- Built one of the chassis received (from Lazada)Ā Ā
- Finished designing printable draft of turntableĀ Ā
Ā
We started building the chassis (golden inĀ colour āØĀ that we received from Lazada a few days back. It took us 2-3 hours just to build the chassis from the many un-assembled parts, but it was a fun experience screwing and tightening the parts together as well as adjusting the tracks. We had to adjust the tracks because they do not fit exactly to the chassis, so we had to make them shorter. Note that the picture below shows the already partly assembled chassis by us. The motors, wheels and platform were not assembled together initially and we had to screw everything together.Ā
Designing the turntable for the transceivers is our first attempt at fusion 360 and we took quite a while just to get the basics and went on designing the turntable. Below is a screenshot of the first completed design of the turntable. Ā
Tomorrow will be our last lab day of the week. See you guys! ššš Ā